Can smart glass/film be remotely activated?
Yes, smart glass/film can be remotely activated. Transformer can be integrated with various controls as you like: remote contol, wall switch control, dimmer control, wifi-App control, etc.
Does PDLC smart glass conduct electricity?
No, the internal PDLC layer is plastic and does not conduct electricity, since it is electrically insulated. Rather, it behaves more like a capacitor, where the applied signal alternates between positive and negative voltages at the plates of the capacitor, causing an alternating electric field throughout the PDLC dielectric, which is what aligns the liquid crystals with the frequency of the signal (normally 50 Hz or 60 Hz).
Can smart glass/film be used in wet areas?
Yes, smart glass/film can be used in wet areas such as bathrooms. The edges of smart glass/film are are sealed with a non-acid silicone gel that prevent any contact with water.
Are the only states of PDLC just ON and OFF?
No, the transmittance (level of transparency) of the PDLC can be varied from 0% in the OFF state up to any value you want until you reach the maximum transmittance (normally 70% or 80%). This is done by simply altering the voltage from 0 VAC up to 70VAC, which is typically the maximum recommended voltage. This can be done electrically with a variable isolating transformer, or electronically with a switched-mode smart glass dimmer.
Can smart glass be used in outdoor applications?
Yes, smart glass can be installed in outdoor areas as normal laminated glass.